Size and the fitting
I was a bit confused about the sizing chart. Based on the measurements and the chart, I cut size 8 above the waist and scaled to size 12 in the skirt. (Yes, all because of my big hips). As I cut the pattern, I sensed the skirt would be very wide so I firstly basted the seams to try on the garment.
|Final fitting - just on side seams|
The skirt panels flare a little as reana louisse pointed out. Plus scaling to size 12, the dress almost looks like an A-line dress! I shouldn't have graded to size 12! But as I had the garment, I pinched the seams to get a close fit. I marked the adjustment, and then unpicked the seams to redo them. I highly recommend using a French Curve Ruler to reflect the changes on the pattern.
A bit of a pointer on working with the Georgia Dress is to get a good fit. You can either do a full muslin or sew as you try it on. I only did a muslin on the bodice section. The time will be worth while as the dress looks completely different when it fits well.
Photos below show how much adjustment was needed on the pattern pieces. Even though I cut size 12 below the waist, I found size 8 seems to be more suitable.
|Lots of tapering on the skirt|
I found this stretch denim from my stash. Check my invoice. I only need 1 metre fabric which costs me only $3.
|The fabric only costs $3!|
I think the dress looks much better if it's close fitted. So I recommend the fabric that has good stretchiness to be comfortable.
If you machine stitch the hem, make sure to use narrow zigzag stitch to maintain the stretchiness.
I followed the instructions to use a 1 cm seam allowance on the straps, but somehow it turns out to be too narrow. the model photo seems to have a wider straps. I think I should have used 6cm (1/4 inch) seam allowance, and it would have saved me some time trimming the allowance off.
|Straps are too narrow if using 1cm allowance.|
It's difficult the turn the strap right side out, especially when it's as narrow as the pattern and the instruction allow it to be. It would be easier to turn if it was wider.
I recommend using a lap zip instead of invisible zip because you have to sew a few thick layers at the joint of the bodice and the skirt. It would be not be suitable for invisible zip.
I put together a few photos on how to sew a lap zip.
I am making a shirt dress at the moment. Hopefully I can finish it this weekend. Thanks for reading.