Sunday, 26 February 2017

A Cynthia Rowley Peplum Tunic: Simplicity 1104:

I am always a fan of Simplicity's Cynthia Rowley Collection. I made a dress from her collection (Simplicity 1873) a few years ago and I was happy with it. I was initially attracted to Simplicity 1104 by the deep V neckline and the big pleats and fitted princess seams. I had lots of confidence in the pattern before I started sewing it.

The top (or dress if you keep all the length to the knees) only consists of 6 pattern pieces including those of the lining. The main fabric front is one piece and so is the main fabric back.

There are darts and princess seams on each side on both the front and the back, which contours the waist and the bust. There are pleats on the bottom of the darts and princess seams. The design is very flattering.

Pattern Alterations
I read the reviews and most people recommend raising the V neckline. I used size 14 neckline because it sits above size 10 on the pattern as recommended in velosewer's review.

The lining only lines the top. I hate half lined garment. So I redrafted the lining pattern pieces  by overlapping the original lining pattern on the folded main fabric pattern and traced the remaining length on the main fabric pattern. Here is a picture showing how to extend the lining pattern.

I did not add bias binding on the hem. Since the top is a bit too long for me, I folded up 3 cm from the bottom edge and hand stitched a blind hem. 

I cut a size 10, although my measurement is a 12 bodice and 14 from the waist according to the envelope chart. I made a size 12 (graded to 14 from waist) muslin but it turned out very big.  So I made a full size 10. It turned out the waist is a bit too tight. I should have added 1/4 inch at the side seams.  

I think the armholes are a little too big for me. Not a big issue but little thing I can improve if I make it again.

I used only 1.1m  Double Face Satin  (150cm wide), and 0.75m lining (also 150cm wide). I found fabric that holds some body makes the pleats look better.

I quickly made a mistake by gluing the neckline interfacing to the main fabric. The interfacing should be attached to the lining! Oh Well.. Lesson learnt - Always read your instructions before sewing!

Bottom of the darts and princess seams and sewn up to create darts. I love pleats but I don't like sewing pleats. There are a few short stitches here.

An invisible zip was installed on the centre back. It's good to leave a couple of inches on the neckline from the centre back unstitched so the invisible zip was installed neatly.

I use pinking shears to trim the edges because the top is fully lined.

It’s a very flattering peplum top. The darts and the princess seam contour the bust and the waist very well. It is clinching the waist and has lots of volume below the waist.

I didn’t own any peplum tops so it’s good to have one now, but I don’t think it’s for pear shapes. I found peplums tend to make hips look bigger. It would be nice if you have long and skinny legs below it to balance the accentuation of the hip, but the pear shapes have big thighs and short legs. IMO it just makes pear shapes look more “pear”.  Nonetheless, I still want to make the dress version of this pattern to see what it will be like.

Wednesday, 15 February 2017

A Tale of Two Swimsuits

I always wanted a pink swimsuit. When I saw Pattern Review's Activewear Contest, I said, that’s it, it’s time to make a swimsuit. I had NEVER made a swimsuit before, and had zero idea of how difficult it could be. But the optimistic me thought that there are so many online resources nowadays and I could learn, so I took the plunge.

Finding the pattern, learning the skills, choosing fabric and supplies...
I started with last year’s PR contest winner treefrog’s Swimsuit. I really like the design of that swimsuit. I tracked down the seller (also the designer) of that pattern on Esty. I locked my eyes on this swimsuit pattern because: 1) the underwired cups and lapel/turn-back are so eye catching 2) the design is quite unique and modern without straight side seams. So I ordered the patterns all the way from the Netherlands.  

As I was determined to make this swimsuit, while waiting for the pattern, I started reading blogs about bra making.  I got a little bit of an idea what the components of my bra were, but I was still so confused how to install the channelling and sewing the cups.

Two weeks later, I received the pattern in my letter box. I was excited to open the pattern but soon disappointed and stressed after I found out the sewing instructions were like the Burda Style Magazine type – concise, only words and NO ILLUSTRATIONS. I read the instructions many times and I just couldn’t understand and visualise all the steps and the materials.  I GOT STUCK.

The breakthrough is when I posted a question on Melbourne Spoolettes’ FB page (closed group) asking other group members where to source the materials and tips for making swimsuits. One of the ladies recommended the Closet case’s Sophie swimsuit pattern and their online workshop.
I enrolled in the course and it comes with a free pattern. I was surprised. This is the best money I spent on an online sewing course ever! It’s so well presented and extremely informational for a beginner like me.

By then I had met with Georgina at (also recommended by the ladies on FB) She helped me with buying the supplies I need. She explained to me what power net, bra foam and swimwear lining are in great details with the actual product. Combined with the online workshop, I can imagine putting together my swimsuit.

The Remnant Warehouse has a great range of chlorine-resistant swimwear lycra. Most of the printed ones come from Jets Swimwear, a premium Australian swimwear brand. I ordered the

Making it… Muslin #1 Sophie Swimsuit
Initially I only planned to just watch the videos for the bits that I needed for my swimsuit project. I ended up watching the whole course and made a sample of the Sophie Swimsuit. Heather, the presenter, is such a well-spoken and hands-on teacher. She really inspired me to give it a go with her Sophie Swimsuit.
Sophie Swimsuit.... First swimsuit I ever made.

This is the first swimsuit I made. It’s not too bad. There are a few things I can improve on if I make the pattern again (I think I will). But, for now, I learnt some important tips:
1.     Use a walking foot for Lycra. I didn’t know until I watched Heather’s video. It makes a huge difference.
2.     Use straight stitch to sew the cups and use a serger to sew the other seams.
3.     Use clear elastic to stabilise the top edge of the cup (more details below).
4.     The long arrows on swimsuit patterns are actually stretch lines. You need to find the more stretchy direction of the fabric, which can be lengthwise, or crosswise depend on the fabric, and align the pattern pieces along the stretch line.

Finally making it… Muslin #2 my swimsuit
After practising sewing a swimsuit with Sophie (above), I still wanted to make a muslin of my swimsuit to check the fitting, and practise again.

Luckily I made this muslin, I found a couple of areas I need to improve such as the cups. As you can see in the photo below:

Finally Really Making it… the Real Swimsuit
Yay, I am finally cutting the fabulous fabric for my swimsuit.

Apart from the fitting changes mentioned above, I also make some changes on the construction:
1.     I added a power net to line the upper cup (see the photo below)
2.     I added a swimwear lining to the front body piece and the shoulder straps because the printed fabric is thinner than the plain one.

So it’s done

I would really like to wear it to the beach and take some photos, but I only finished it today and I need to post it up for PR’s activewear contest. However, I will put up some photos once I have a chance to go to the beach.

The past month is such a steep learning curve for me. I really enjoy the whole learning experience, although sometimes it’s a bit stressful with a deadline at the back of my mind. Like making my wedding gown from zero knowledge a few years ago, this is such fun learning a whole new skill and it’s really encouraging for me to take on any project in the future. I am looking forward to starting making my own bras.

Happy sewing.
Cloud is such a good companion

Sunday, 5 February 2017

Late to the Renfrew Top Party

I am really late to the Renfrew Top Party, although I have had this pattern since three years ago.  The main reason I hadn’t sewn it is because I kept avoiding knits and only seriously wanted to starting sewing it once I bought a coverstitch machine. I did buy a Janome CoverPro a couple years ago, but I wasn’t fully satisfied with it. I could have given a lengthy review about the machine and that will only discourage you from getting one.

So fast forward to the beginning of 2017, I was frustrated by my CoverPro enough to have the courage to buy a brand new Baby Lock BLCS-2 Coverstitch Machine. I spent big $$ for it. I wouldn’t say it’s worth every cent because Baby Lock’s prices are highly inflated in Australia, but it’s a GOOD coverstitch machine. I finally have all the motivation to make my first Renfrew top (I reckon there will be more).

I cut size 6 although my measurement is a size 8 according to the size chart. I didn’t make much adjustment except shortening the sleeve by ½ inch. I am happy with the fitting.

I am not familiar with the different types of knit fabric. I can’t tell what fibres are in this fabric. The fabric is very comfy and warm. I use 1.2 metre @ $4/metre.

I always try to match the stripes at the side seams if I am sewing stripe fabric. It just looks much better.

Stripes at side seams matched.

The construction is very straightforward. Most of the knit fabric patterns give 5/8 inch seam allowance. At the beginning, I followed the instructions and sewed 5/8" S.A on my sewing machine, then I ran it under the serger, trimming off 1/4" S.A and left a narrow S.A. I found this a bit time consuming. So when I did the waistband (the last seam of the project), I just stitched on the serger, eyeballing 1/4" seam allowance to trim it off. It is actually really easy and saves lots of time. I think I need to get used to sewing knit fabric directly on the serger from now on.

At the neckband, I made good use of my babylock coverstitch.

Like all my other Sewaholic projects, I always want to make another one after the first. Renfrew is no exception. Plus, I love wearing knit tees.
Related Posts Plugin for WordPress, Blogger...